1-27-2018 Updates – Seed & Seedling Projects

Growing Plumeria from Seeds > 2018 Projects > 1-27-2018 Updates – Seed & Seedling Projects
Posted on by texn

January 27th, 2018

Seed selection and planting, it’s time to start working on the details. My planned start date, Feb 1st is just around the corner.

Here is the list of seeds, Gina, Hope, Heirloom, Jackie, Metallica, Super Round (J115), Jack’s Purple, Dwarf Singapore Pink, Mardi Gras, Aztec Gold, Waimea, Bonnie Fox, Raspberry Sundae….so far!

Products Needed:
Plumeria Seeds, something to soak the seeds in, 2” x 3” Gro-Tech FlexiPlugs and trays, Vitazyme, Carl Pool’s Root Activator, Bioblast 7-7-7, Pro-Mix BX Mycorrhizae, Excalibur VI 11-11-13, Metal Labels or plastic plant markers and permanent felt tip marker. Hydrogen Peroxide and Merlin’s Potion for new experiments. 

2018 Seed & Seedling Projects

Basic Planned Regimen for 2018 Seed Projects

  1. Dip seeds in a mix of Vitazyme and warm (not hot) water. Caution: Allow to dry before proceeding.
  2. Soak seeds in warm water until plump. A good rule of thumb: Seeds that sink after absorbing water are usually viable. Seeds that float are normally not viable. Gives them a head start and a good way to checks viability. Caution: It’s important you do not continue to soak after you see the roots starting. They should be put in soil or plugs at that point. Waiting will only increase the chances of damaging the roots.
  3. Soak plugs in Vitazyme (1 oz. per Gal) and Root Activator (2 oz. per gal) Soak for 1 to 2 hours. (New Experiment: soak in 1 oz of hydrogen peroxide per 1 gal.) 
  4. Place seeds in plugs with the flags and deep enough to cover the body of the seed with the flag sticking up and above the soil and water well. Plumeria seeds will also germinate by placing them on the side and covering with 1/2″ of so of soil.
  5. Place in sunny location, I think full sun is the reason I’ve had almost no problems with damping off or seedling rot. Caution: In hot regions you may need some shade
  6. Water often to keep plugs very moist. 2-3 times a day. The FlexiPlugs are foam injected peat plugs, that have proven to provide great air circulation even when wet and the plumeria seeds grow great. Although decomposition takes much longer than normal plugs, I feel it is worth the trade off. Caution: In areas where you sun will burn leaves, you may have to only water well in morning and evening.
  7. Start Foliar feeding with Bioblast (1 tablespoon per gal) as soon as they all have an average of 3-4 leaves. Remember when the seed leaves go away the seedling will need nutrients from the soil or fertilizer. Caution: Apply only Early or Late in the day, not in strong sunlight, it may burn the leaves.
  8. When you see several roots coming out the bottom and or sides of the plug transplant to 1 gal pot. Caution: Be sure the Plugs are complete covered by soil, this will help the decomposing and prevent premature drying out. (New Experiment: I plan on transplanting the 2″x3″ plugs to a 7.5 gal squat pots)
  9. I suggest using Pro-Mix BX Mycorrhizae for your soil mix.
  10. Fertilize with Excalibur IX 11-11-13 (1 tablespoon per gal pot) Mix in top 1” of soil to cover fertilizer granules and water well. I suggest 9 month because you can apply again in 9 months providing nutrients all year long. Caution: If you can’t keep the seedling growing all year long, It may be better to use Excalibur IX at the beginning of the growing season.
  11. If possible keep seedlings growing for the first year by keeping in a warm, sunny location. Additional Lighting may be needed.
  12. Water as needed, allow pot to almost dry out and water well making sure all the soil is evenly watered. A moisture meter is always a good tool to have.

2018 Planned Experiment 1 – (Hydrogen Peroxide)

  1. Dip seeds in a mix of Vitazyme, Hydrogen Peroxide and warm (not hot) water. Caution: Allow to dry before proceeding. Optional will dip some and not dip some.
  2. Soak seeds in warm water and Hydrogen Peroxide until plump. (1 oz of hydrogen peroxide to 1 gal, final mix to be determined) A good rule of thumb: Seeds that sink after absorbing water are usually viable. Seeds that float are normally not viable. Gives them a head start and a good way to checks viability.
  3. Soak plugs in Vitazyme (1 oz. per Gal), Root Activator (2 oz. per gal) and Hydrogen Peroxide (1 oz to 1 gal) Soak for 1 to 2 hours. 
  4. Place seeds in plugs with the flags and deep enough to cover the body of the seed with the flag sticking up and above the soil and water well.
  5. Place in sunny location, I think full sun is the reason I’ve had almost no problems with damping off or seedling rot. 
  6. Water often to keep plugs very moist. 2-3 times a day work for me.
  7. Start foliar feeding with Bioblast (1 tablespoon per gal) as soon as they all have an average of 3-4 leaves. Remember when the seed leaves go away the seedling will need nutrients from the soil or fertilizer. 
  8. When you see several roots coming out the bottom and or sides of the plug transplanting the 2″x3″ plugs directly into 7.5 gal squat pots and 3 gal pot.
  9. Soil is Pro-Mix BX Mycorrhizae or a mix with Florida Colors soil and Pro-Mix Mycorrhizae. Details of the mix coming at time of transplanting.
  10. When transplanting, fertilize with Excalibur VI 11-11-13 (1 teaspoon per gal pot) Mix in top few inches of soil, it is best to completely cover fertilizer granules and water well. I use 6 month I keep seedling growing year around and I apply again in 6 months providing nutrients all year long.
  11. If possible keep seedlings growing for the first year by keeping in a warm and in a sunny location. Additional Lighting may be needed.
  12. Water as needed, allow pot to almost dry out and water well making sure all the soil is evenly watered. A moisture meter is always a good tool to have.

2018 Planned Experiment 2 – (Merlin’s Magic Potion – MMP)

  1. Dip seeds in mix of Merlin’s Magic Potion and warm water and allow to dry before proceeding.
  2. Soak seeds in warm water and Hydrogen Peroxide until plump. (1 oz of hydrogen peroxide to 1 gal)
  3. Soak plugs in Merlin’s Magic Potion (2 oz per gal) Soak for 1 to 2 hours. 
  4. Place seeds in plugs with the flags and deep enough to cover the body of the seed with the flag sticking up and above the soil and water well.
  5. Place in sunny location, I think full sun is the reason I’ve had almost no problems with damping off or seedling rot. 
  6. Water often to keep plugs very moist. 2-3 times a day has worked for me.
  7. Start foliar feeding with Bioblast (1 tablespoon per gal) as soon as they all have an average of 3-4 leaves. Remember when the seed leaves go away the seedling will need nutrients from the soil or fertilizer. Foliar feed every two weeks (1 oz to 1 gal of water) 
  8. After two weeks or so, but before transplanting into pots, soak plugs with seeds in a mix of Merlin’s Magic Potion and water. (1 oz to 1 gal of water)
  9. When you see several roots coming out the bottom and or sides of the plug transplanting some of the 2″x3″ plugs directly into 7.5 gal squat pots and some in 2-3 gal pot.
  10. Before transplanting into pots, soak plugs with seeds in a mix of Merlin’s Magic Potion and water. (1 oz to 1 gal of water)
  11. Soil is Pro-Mix BX Mycorrhizae or a mix with Florida Colors soil and Pro-Mix Mycorrhizae. Details of the mix coming at time of transplanting.
  12. When transplanting, fertilize with Excalibur VI 11-11-13 (1 teaspoon per gal pot) Mix in top few inches of soil, it is best to completely cover fertilizer granules and water well. I use 6 month I keep seedling growing year around and I apply again in 6 months providing nutrients all year long.
  13. If possible keep seedlings growing for the first year by keeping in a warm and in a sunny location. Additional Lighting may be needed.
  14. Water as needed, allow pot to almost dry out and water well making sure all the soil is evenly watered. A moisture meter is always a good tool to have.
  15. Drench with Merlin’s Magic Potion (2 oz to 1 gal of water)
  16. Continue foliar spraying with Bioblast every two weeks (1 oz to 1 gal of water) 

Depending on the weather, I planning on starting this project on Feb 1, 2018. Come back then.